This listing is made for you to pre-order the next production run of P-FLAT sheets with an ETA of mid November 2026. By placing an order through this listing you understand that these are not currently in stock and your order may be subject to change if any sheets are damaged in production/shipping etc. You can cancel the order at any time. If you have any questions please send me a message first at Contact@Kaizen3DPrints.com
Size Updates - There are now just three sizes to accommodate as many printers as possible. 256mm x 256mm, 300mm x 300mm and 350mm x350mm. They can easily be cut down to size.
Style Updates - The "Inception" style pattern currently has damage on a portion of it, so large 350x350 sheets are currently removed from the options list. This may change as production continues. "Leather" will only be available in 350mm x 350mm however the physical pattern will only be 280x350 due to manufacturing restrictions.
If you would like to see the current inventory in stock, please go here -
https://kaizen3dprints.com/products/holographic-magnetic-p-flat-sheets-via-reservation-request
This is a holographic magnetic P-FLAT (Pattern Flat) sheet for 3D printers (and other crafts). The magnetic sheet is to be placed directly on top of an existing metal plate with auto bed leveling turned on. Anything that is printed face down will have the effect imbued upon it. The sheet has thousands of microgrooves that copy the light refracting pattern. The effect remains on the build plate for reuse. I have about 300 prints on a majority of my sheets and they are still going strong.
With excessive handling or the deposit of oils/debris, the effect can diminish. The effect can be refreshed with an alcohol prep pad, or some isopropyl alcohol. These should be stored flat with tissue paper in between, or on a magnetic board to prevent damage.
I use very slow speeds for first layer adhesion, generally 35mm/s, with 55-65 degree build plate temp. I use a .24mm first layer height and a fresh isopropyl wipe before every print. You must wait for the surface to cool to around 40 degrees Celsius before removing the print, or you'll risk damaging the surface/print. Isopropyl alcohol in a small spray bottle is recommended to ease removal, especially when printing Flex PLA or TPU. I don't use these sheets above 70 degrees Celsius personally. These sheets excel at printing lots of small pieces with excellent adhesion. Large surface areas are susceptible to warping the magnetic sheet.
Below are some videos with more details
https://youtube.com/shorts/0X3rzFR_9j8?si=YlL5xR2L-t18VnGt
https://youtube.com/shorts/xFZkhiewH2E?si=_DjUnPLQaKwtFK2c
https://youtube.com/shorts/FWwcHas2WFA?si=571EmBkFqXWK1Ovh
https://youtube.com/shorts/mZDn-tg_OHU?si=BrWbAKA5kVTYmvDz
https://youtube.com/shorts/umCCkZHH02o?si=ni5BIEhcIg3BQCZV
Please keep in mind that these can be cut down to size. If you have different build plate dimensions, simply choose the one that is a bit larger.
256x256 (P1S, P2S, A1, X1C, X2D, Core One)
300x300 (Snapmaker U1, K1 Max, Core One L, SV06+, Neptune 4 Max, etc)
350x350 (H2S, H2C, H2D, K2 Plus, etc) - The Prusa XL has a 360x360 build plate, be aware this size will not reach edge to edge.
3+ sheets = 5% off
6+ sheets = 10% off
Buyer is responsible for any additional customs and import fees. - Orders will be shipped as soon as the back-ordered designs have been received. Buyer can cancel order at any time for a full-refund.
If you have any questions, please feel free to contact me at Contact@Kaizen3DPrints.com
