This is a magnetic P-FLAT (Pattern Flat) sheet for 3D printers with 5 different build plate sizes (184x191, 220x220, 235x250, 256x256, and 300x300). These can also be cut to size, depending on your individual build plate size. These have a magnetic backing to them. They are intended to be placed directly on top of the existing build plate surface, followed by performing a new bed level calibration. Anything that is printed face down, will have the effect imbued upon it.
I use very slow speeds for first layer adhesion, generally around 25-40mm/s, with 55-65 degree build plate temp. These are a consumable, over time the effect will be less prominent, however, I have about 200 prints on each of mine and I have not seen any noticeable change. You must wait for the surface to cool to around 40 degrees Celsius before removing the print, or you'll risk damaging the surface. Isopropyl alcohol is recommended to ease removal, especially when printing Flex PLA or TPU.
I have combined all the build plate styles and sizes into this one listing.
Buyer is responsible for any additional customs and import fees. - Orders will be shipped with 3 days of purchase.
If you have any questions, please feel free to contact me @ Kaizen3Dprints@gmail.com
